Download the latest drivers, firmware, and software for your HP IDE CD-ROM Drive.This is HP’s official website that will help automatically detect and download the correct drivers free of cost for your HP Computing and Printing products for Windows and Mac operating system. 071-91X Atapi CD-ROM device driver, Rec D91XV352 (c) Oak Technology Inc, 1987-1991 Device name: OEMCD001 No drives found, aborting installation-I can boot in dos mode from the boot disk but it will not give me access to the CD ROM. If I try to run autoexec.bat fromthe A: prompt, I get:-Device driver not found: OEMCD001.

Hello Jens Axboe,
I'm try to report bug.

[1.] ide-cd: cmd 0x5a timed out, hdd: lost interrupt
[2.] I'm have configuration file from good working kernel 2.6.5.
Patch kernel 2.6.5 to kernel 2.6.6. Do: make oldconfig. There is
changes in configuration files:
22a23
> # CONFIG_POSIX_MQUEUE is not set
24a26
> # CONFIG_AUDIT is not set
35a38
> CONFIG_IOSCHED_CFQ=y
426,427d428
< # CONFIG_DECNET is not set
< # CONFIG_BRIDGE is not set
481a483
> # CONFIG_IP_NF_RAW is not set
487a490
> # CONFIG_BRIDGE is not set
488a492
> # CONFIG_DECNET is not set
508a513,517
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
509a519,522
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
515,518d527
< # CONFIG_DUMMY is not set
< # CONFIG_BONDING is not set
< # CONFIG_EQUALIZER is not set
< # CONFIG_TUN is not set
535d543
< # CONFIG_SIS190 is not set
542a551,566
> # CONFIG_S2IO is not set
>
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
555,564d578
<
< #
< # Wireless LAN (non-hamradio)
< #
< # CONFIG_NET_RADIO is not set
<
< #
< # Token Ring devices
< #
< # CONFIG_TR is not set
571,592d584
< # Wan interfaces
< #
< # CONFIG_WAN is not set
<
< #
< # Amateur Radio support
< #
< # CONFIG_HAMRADIO is not set
<
< #
< # IrDA (infrared) support
< #
< # CONFIG_IRDA is not set
<
< #
< # Bluetooth support
< #
< # CONFIG_BT is not set
< # CONFIG_NETPOLL is not set
< # CONFIG_NET_POLL_CONTROLLER is not set
<
< #
933a926
> # CONFIG_USB_PEGASUS is not set
957a951
> # CONFIG_USB_CYTHERM is not set
1006a1001
> CONFIG_SYSFS=y
1104a1100
> # CONFIG_4KSTACKS is not set
1121a1118
> # CONFIG_LIBCRC32C is not set
1124a1122
> CONFIG_X86_STD_RESOURCES=y

Google CD-ROM Driver


On boot new kernel, I see such things (dmesg):

ICH: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
hda: QUANTUM FIREBALLP LM20.5, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdd: _NEC NR-7700A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 40132503 sectors (20547 MB) w/1900KiB Cache, CHS=39813/16/63, UDMA(66)
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
ide-cd: cmd 0x5a timed out
hdd: lost interrupt
ide-cd: cmd 0x5a timed out
hdd: lost interrupt
ide-cd: cmd 0x5a timed out
hdd: lost interrupt
hdd: lost interrupt
hdd: lost interrupt
hdd: lost interrupt
ide-cd: cmd 0x3 timed out
hdd: lost interrupt
hdd: lost interrupt
hdd: lost interrupt
hdd: lost interrupt
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(25)
Uniform CD-ROM driver Revision: 3.20
hdd: lost interrupt
ide-cd: cmd 0x3 timed out
hdd: lost interrupt
ide-cd: cmd 0x25 timed out
hdd: lost interrupt
hdd: lost interrupt
ide-cd: cmd 0x3 timed out
hdd: lost interrupt
ide-floppy driver 0.99.newide

There is different between log file kernels 2.6.5 and 2.6.6:

kernels 2.6.5:

May 12 23:53:25 darkstar kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
May 12 23:53:25 darkstar kernel: ide: Assuming 33MHz system bus speed
for PIO modes; override with idebus=xx
May 12 23:53:25 darkstar kernel: ICH: IDE controller at PCI slot
0000:00:1f.1
May 12 23:53:25 darkstar kernel: ICH: chipset revision 2
May 12 23:53:25 darkstar kernel: ICH: not 100%% native mode: will probe
irqs later
May 12 23:53:25 darkstar kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS
settings: hda:DMA, hdb:pio
May 12 23:53:25 darkstar kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS
settings: hdc:pio, hdd:DMA
May 12 23:53:25 darkstar kernel: hda: 40132503 sectors (20547 MB)
w/1900KiB Cache, CHS=39813/16/63, UDMA(66)
May 12 23:53:25 darkstar kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8
hda9 >
May 12 23:53:25 darkstar kernel: Uniform CD-ROM driver Revision: 3.20

kernels 2.6.6:

May 12 23:48:08 darkstar kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
May 12 23:48:08 darkstar kernel: ide: Assuming 33MHz system bus speed
for PIO modes; override with idebus=xx
May 12 23:48:08 darkstar kernel: ICH: IDE controller at PCI slot
0000:00:1f.1
May 12 23:48:08 darkstar kernel: ICH: chipset revision 2
May 12 23:48:08 darkstar kernel: ICH: not 100%% native mode: will probe
irqs later
May 12 23:48:08 darkstar kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS
settings: hda:DMA, hdb:pio
May 12 23:48:08 darkstar kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS
settings: hdc:pio, hdd:DMA
May 12 23:48:08 darkstar kernel: hda: 40132503 sectors (20547 MB)
w/1900KiB Cache, CHS=39813/16/63, UDMA(66)
May 12 23:48:08 darkstar kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8
hda9 >
May 12 23:48:08 darkstar kernel: ide-cd: cmd 0x5a timed out
May 12 23:48:08 darkstar last message repeated 2 times
May 12 23:48:08 darkstar kernel: ide-cd: cmd 0x3 timed out
May 12 23:48:08 darkstar kernel: Uniform CD-ROM driver Revision: 3.20
May 12 23:48:08 darkstar kernel: ide-cd: cmd 0x3 timed out
May 12 23:48:08 darkstar kernel: ide-cd: cmd 0x25 timed out
May 12 23:48:08 darkstar kernel: ide-cd: cmd 0x3 timed out

[3.] ide-cd.
[4.] Linux version 2.6.6 ([email protected]) (gcc version 3.2.3) #1 Sun Apr
4 21:16:26 MSD 2004

[7.1] Slackware 9.1 script:
Linux darkstar 2.6.6 #1 Thu May 13 00:38:06 MSD 2004 i686 unknown
unknown GNU/Linux
Gnu C 3.2.3
Gnu make 3.80
binutils 2.14.90.0.6
util-linux 2.12
mount 2.12
module-init-tools 0.9.14
e2fsprogs 1.34
PPP 2.4.1
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Linux C++ Library 5.0.3
Procps 2.0.16
Net-tools 1.60
Kbd 1.08
Sh-utils 5.0
Modules Loaded autofs4

[7.2]processor:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 704.313
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse
bogomips : 1392.64

[7.3]modules:
autofs4 15616 1 - Live 0xd399c000
[7.4.] driver and hardware information
/proc/ioports:
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
4000-407f : 0000:00:1f.0
4008-400b : ACPI timer
4010-4015 : ACPI CPU throttle
4080-40bf : 0000:00:1f.0
5000-500f : 0000:00:1f.3
c000-c007 : 0000:02:05.0
c000-c007 : au8830
c400-c407 : 0000:02:05.0
c400-c407 : au8830
d000-d01f : 0000:00:1f.2
f000-f00f : 0000:00:1f.1
f000-f007 : ide0
f008-f00f : ide1

/proc/iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cbbff : Video ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-002e0ed4 : Kernel code
002e0ed5-003908ff : Kernel data
0fff0000-0fff2fff : ACPI Non-volatile Storage
0fff3000-0fffffff : ACPI Tables
d0000000-d7ffffff : PCI Bus #01
d0000000-d7ffffff : 0000:01:00.0
d0000000-d1ffffff : rivafb
d8000000-dbffffff : 0000:00:00.0
dc000000-ddffffff : PCI Bus #01
dc000000-dcffffff : 0000:01:00.0
dc000000-dcffffff : rivafb
de000000-de03ffff : 0000:02:05.0
de000000-de03ffff : au8830
ffb00000-ffffffff : reserved

[7.5.] PCI information ('lspci -vvv' as root)

00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and
Memory Controller Hub (rev 02)
Subsystem: Intel Corp. 82815 815 Chipset Host Bridge and Memory
Controller Hub
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [88] #09 [f104]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 02)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: dc000000-ddffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

DriverGoogle

00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: de000000-de0fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02) (prog-if 80
[Master])
Subsystem: Intel Corp. 82801AA IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at f000 [size=16]

00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corp. 82801AA USB
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 15
Region 4: I/O ports at d000 [size=32]

00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
Subsystem: Intel Corp. 82801AA SMBus
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 5000 [size=16]

01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2
MX/MX 400] (rev a1) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

02:05.0 Multimedia audio controller: Aureal Semiconductor Vortex 2 (rev fe)
Subsystem: Diamond Multimedia Systems Monster Sound II
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 3000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=256K]
Region 1: I/O ports at c000 [size=8]
Region 2: I/O ports at c400 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

[7.6.] SCSI information (from /proc/scsi/scsi)
NO

[8] When reboot system with new kernel hard drive suspended and wake up.
On kernel 2.6.5 there isn't such thing.

Cd Rom Drivers Windows 10

Download

I write cdrecord dev=ATAPI -scanbus
On kernel 2.6.5 :
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 JЖrg Schilling
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) *
0,1,0 1) '_NEC ' 'NR-7700A ' '1.05' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *

On kernel 2.6.6 :
Cdrecord go in endless.

Hope my letter wasn't trush:).

Google CD-ROM Driver

Andrew Gusev.

Google Cd-rom Driver Download

-
To unsubscribe from this list: send the line 'unsubscribe linux-kernel' in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/