freebox integration allows you to observe and control Freebox router.
You want to use networks for free via hacking the WiFi password of the WiFi hotspots around you, being a freeloader? Free WiFi Password Hacker can detect all the WiFi networks available and crack their passwords with ease. You won't have to pay for the data any more. Enjoy the fun of using countless WiFi network for media streaming. Reboot the Freebox Restart your Freebox (either by disconnecting and reconnectin itg, or by holding down the '?' Button on the Freebox remote, then select 'Restart the Freebox'. To check if the Freebox router mode is enabled, simply display the IP address of your computer: It must look like that 192.168.x.x. The Freebox is a popular Internet router delivered by French ISP Free to its customers. The original post can be found on the forum. Please contribute any remark that could be usefull and help us. The Freebox is available only in France, therefore this documentation is written in French.
There is currently support for the following device types within Home Assistant:
If you have enabled the discovery integration, your Freebox should be detected automatically.Otherwise, you can set it up manually via the frontend or via your
You can find out your Freebox host and port by opening this address http://mafreebox.freebox.fr/api_version in your browser.The returned JSON should contain an
host) and a
port).Please consult the API documentation for more information.
Menu: Configuration -> Integrations. Search for “Freebox”, add your host and port, click submit.
If you add the integration for the first time, follow the instructions in the Initial setup section.
The URL of the Freebox.
The HTTPS port the Freebox is listening on.
If you change your Freebox router for a new one, go into your Home Assistant configuration
.storage folder and delete the “freebox” folder, then add the integration again.
You must have set a password for your Freebox router web administration page. Enable the option “Permettre les nouvelles demandes d’associations” and check that the option “Accès à distance sécurisé à Freebox OS” is active in “Gestion des ports” > “Connexions entrantes”.
The first time Home Assistant will connect to your Freebox, you will need to authorize it by pressing the right arrow on the facade of the Freebox when prompted to do so.
To make the Wi-Fi switch and the reboot service working you will have to add “Modification des réglages de la Freebox” permission to Home Assistant application in “Paramètres de la Freebox” > “Gestion des accès” > “Applications”.
Only the routers with Freebox OS are supported:
This platform offers presence detection by keeping track of the devices connected to a Freebox router.
Note that the Freebox waits for some time before marking a device asinactive, meaning that there will be a small delay (1 or 2 minutes)between the time you disconnect a device and the time it will appearas “away” in Home Assistant. You should take this into account when specifyingthe
consider_home parameter.On the contrary, the Freebox immediately reports devices newly connected, sothey should appear as “home” almost instantly, as soon as Home Assistantrefreshes the devices states.
This platform offers you sensors to monitor a Freebox router.The monitored conditions are internal temperature and upload and download rates in KB/s.
This service will reboot your Freebox router. It does not take any parameter. Be aware there is no confirmation.
This platform offers you a switch to toggle the Wi-Fi on or off. This will toggle all Wi-Fi interfaces of the router (all SSID and all bands).